Share
Results 1 to 6 of 6

Thread: 25' CK26 Torch w/ gas saver kit and Dinse connector

  1. Default 25' CK26 Torch w/ gas saver kit and Dinse connector

    I bought a new CK26 air torch, CK gas saver kit and CK Dinse connector. I ordered it then before it came in I decided that I wanted a 130A flex head torch so this one is extra and needs to go. Comes with everything needed to hook up to a 200DX (and likely other similar machines). The torch came with a gas through dinse, but I am selling an Everlast compatible Dinse connector with the external gas hose. You will need to swap the dinse connector onto the torch hose and then swap your gas hose barb from your original torch onto the dinse connector hose and you will be ready to weld (just add tungsten).


    CK26-25-R RG 200A Torch with 25' hose
    CK SL8-35 Dinse connector
    CK-D3GS332-P 3/32" Clear Gas Lens Kit

    New this all cost $190 plus shipping. Will sell for $160 shipped (in the US).

    email me at chris @ candbmotorsports.com for more info.

    Thanks,
    Chris

    Everlast Powertig 200DX
    Miller Synchrowave 200
    Miller Dynasty 300 (Work Machine)
    Hobart Handler 210MVP
    HTP Microcut 30

  2. Default

    I would accept a reasonable offer if you are interested.

    Thanks,
    Chris
    Everlast Powertig 200DX
    Miller Synchrowave 200
    Miller Dynasty 300 (Work Machine)
    Hobart Handler 210MVP
    HTP Microcut 30

  3. Default

    Still available. Any reasonable offer will be considered.

    Thanks,
    Chris
    Everlast Powertig 200DX
    Miller Synchrowave 200
    Miller Dynasty 300 (Work Machine)
    Hobart Handler 210MVP
    HTP Microcut 30

  4. Default

    Will you post to Australia

  5. Default

    Yes I will. Check your private messages.

    Thanks,
    Chris
    Everlast Powertig 200DX
    Miller Synchrowave 200
    Miller Dynasty 300 (Work Machine)
    Hobart Handler 210MVP
    HTP Microcut 30

  6. Default

    SOLD

    Thanks,
    Chris
    Everlast Powertig 200DX
    Miller Synchrowave 200
    Miller Dynasty 300 (Work Machine)
    Hobart Handler 210MVP
    HTP Microcut 30

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •