Share
Results 1 to 5 of 5

Thread: Trafimet A-101 torch for PP60. 70 or 80

  1. Default Trafimet A-101 torch for PP60. 70 or 80

    Anyone tried a Trafimet A-101 torch with there powerplasma 60, 70 or 80? Looks like it has better drag tip options. I like the looks of the standard tips also. 1.1mm is the smallest.

  2. #2
    Join Date
    Sep 2011
    Location
    Home, Pa (Yes, that's the name of the town.)
    Posts
    121

    Default

    I was also wondering about getting the A101 torch on a Power Plasma 60. My LWS carries consumables for the A101 but not the A81. The A101 also has a better duty-cycle but for all the more cutting I will be doing, I don't think this will be much of an advantage. So, would it be possible to get a PP60 with a Trafimet A101 torch?
    Brad George
    George's Welding & Repair
    Amateur at TIG, MIG, and General Fabrication.
    Current Equipment
    AIRCO Heliwelder IV 300Amp Model - Total Awesomeness!
    Hobart Handler 120v MIG

  3. #3
    Join Date
    Sep 2011
    Location
    Home, Pa (Yes, that's the name of the town.)
    Posts
    121

    Default

    No one at Everlast has any insight on this?
    Brad George
    George's Welding & Repair
    Amateur at TIG, MIG, and General Fabrication.
    Current Equipment
    AIRCO Heliwelder IV 300Amp Model - Total Awesomeness!
    Hobart Handler 120v MIG

  4. #4

    Default

    sorry guys , i missed it


    We can get you A101 torch , it will be around 400usd. let me know if you need it .
    we can only get pretty good price on S45 and A81
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  5. #5

    Default

    Quote Originally Posted by blasphemy000 View Post
    I was also wondering about getting the A101 torch on a Power Plasma 60. My LWS carries consumables for the A101 but not the A81. The A101 also has a better duty-cycle but for all the more cutting I will be doing, I don't think this will be much of an advantage. So, would it be possible to get a PP60 with a Trafimet A101 torch?
    I have the WP80 and A81 for my PP60. Rather have a euro pilot arc WP80 myself. Smaller head to get into tighter areas/cuts. I like the A81, consumable price not so cheap. You can ask for the Panasonic style 80 amp as well. Like I did.
    Mike R.
    Email: everlast@us-it.net
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •